HP Marine Synthetic 2-Stroke Oil – Quart (946ml)

Description

High-quality motor oil is critical for maximum performance in modern two-stroke marine motors. Direct fuel injection (DFI) improves combustion efficiency, delivering the extra power enthusiasts want, while leaner gas-to-oil ratios provide the reduced exhaust emissions the government mandates. The leaner ratio leaves less oil to lubricate and protect these hotter, more powerful motors, which invites deposits and wear that threaten engine performance and life. HP Marine is proven to excel in these harsh conditions. It controls performance-robbing friction, heat and wear, yet produces low smoke and has low aquatic toxicity properties. It’s an oil as advanced as the engines it protects.

  • Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil)
  • Helps prevent deposits
  • Protects against wear
  • Low smoke
  • Protects against rust
  • Low aquatic toxicity
  • Superior performance as an injection oil or at 50:1 pre-mix
  • Outstanding Wear Protection

The elevated heat and friction of modern two-stroke marine motors can exceed the film strength of inferior oils, increasing the likelihood of scuffing and wear. HP Marine’s exclusive synthetic formulation provides increased lubricity for reduced wear during normal and lean-mix operation (see field study results). In 534 hours of field testing, HP Marine completely prevented piston skirt and cylinder bore scuffing, demonstrating its superior lubricity and ability to reduce friction between moving parts. It maintains a strong lubricating film even in lean-mix, severe-service conditions, helping marine engines achieve maximum life.

Excellent Deposit Control

HP Marine is formulated with MAXDOSE™, a system of advanced additives for “super-clean” operation. It helps prevent deposits that lead to poor performance. In field testing, HP Marine inhibited ring deposits that can cause ring sticking and ring jacking (carbon build-up behind the ring, forcing it outward), a phenomenon that occurs in modern DFI outboard motors. It also virtually eliminated exhaust port deposits for reliable, efficient operation.

Proven in Marine E-TEC Field Study

HP Marine was installed in a 250-hp Evinrude E-TEC engine powering a heavy-duty marine rescue vessel. Following a 28-hour break-in period at the normal oil setting, the engine was programmed to its factory-lean setting and operated for 506 hours prior to disassembly. An ASTM calibrated rater examined and awarded each component either a merit rating on a scale of 0 to 10 (with 10 representing no distress) or a percentage rating (with 0 percent representing no distress). Results prove HP Marine provided exceptional wear protection and deposit control. For complete study results, visit amsoil.com/proof.

Applications

HP Marine™ is recommended for use in all two-stroke outboard motors including, but not limited to, Johnson® and Evinrude® FICHT® & E-TEC™ (replaces XD100™ 2-Cycle Oil); Mercury® EFI & Optimax®; Yamaha®; Nissan® and Tohatsu® TLDI®; Suzuki®; Mariner® and Force®. It is also recommended for use in all two-stroke personal watercraft (PWC). Use as injection oil or as 50:1 pre-mix (2.6 oz. per U.S. gallon of gas) where NMMA TC-W3 or API TC oils are specified. Compatible with mineral and synthetic TC-W3-type two-stroke oils; however, mixing two-stroke oils should be minimized.

Warranty Secure™

HP Marine Synthetic 2-Stroke Oil is Warranty Secure, keeping your factory warranty intact. HP Marine is a high-performance replacement for vehicle manufacturer-branded products and is also backed by the AMSOIL Limited Warranty (G1363). For details, visit www.amsoil.com/warrantysecure.

Health & Safety Statement

This product is not expected to cause health concerns when used for the intended applications and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available online at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Recycle used oil and bottle.

DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.

For detailed typical technical properties, download the product data bulletin.

HPM Packaging Information
Code Package Size Unit of Measure Product
HPMQT (HPMQT-EA) Quart Each HP Marine Synthetic 2-Stroke Oil
HPMQT (HPMQT-CA) Quart Case of 12 HP Marine Synthetic 2-Stroke Oil
HPM1G (HPM1G-EA) Gallon Each HP Marine Synthetic 2-Stroke Oil
HPM1G (HPM1G-CA) Gallon Case of 4 HP Marine Synthetic 2-Stroke Oil
HPM16 (HPM16-EA) 16-Gallon Keg Each HP Marine Synthetic 2-Stroke Oil
HPM30 (HPM30-EA) 30-Gallon Drum Each HP Marine Synthetic 2-Stroke Oil
HPM55 (HPM55-EA) 55-Gallon Drum Each HP Marine Synthetic 2-Stroke Oil
HPM27 (HPM27-EA) 275-Gallon Tote Each HP Marine Synthetic 2-Stroke Oil

Additional information

Brand

AMSOIL

Size

Quart 964ml

Reviews

There are no reviews yet.

Be the first to review “HP Marine Synthetic 2-Stroke Oil – Quart (946ml)”

Your email address will not be published. Required fields are marked *


$30.00