Description
Specifically designed for outboard motors, Saber Outboard (ATO) contains a heavy dose of low-temperature dispersant additives that excel at reducing varnish and carbon deposit formation in water-cooled motors. Saber Outboard also performs well in personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Its low-smoke, low-odor, low-toxicity properties produce fewer emissions at 100:1 mix ratios than oils mixed at 50:1, benefitting operators and the environment. Saber Outboard is formulated to prevent “oil loading” and plug fouling for rapid throttle response, making it ideal for trolling motors. Recommended for pre-mix use where TC-W3 or API TC is specified.
Applications
(2-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.
TYPICAL TECHNICAL PROPERTIES Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO) |
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
17.9 |
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
141.2 |
Viscosity Index (ASTM D-2270)
|
141 |
Pour Point °C (°F) (ASTM D-97) |
-33 (-27) |
Flash Point °C (°F) (ASTM D-92) |
120 (248) |
Fire Point °C (°F) (ASTM D-92)
|
138 (280) |
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
|
Reviews
There are no reviews yet.